A worker placing pink safety cones in the preparation for a blasting operation.

Hole Covers

The Hole Covers are used to reduce the number of lost blastholes as a result of collar collapses, water ingress and debris blockages.

With the cones:

  • Holes are kept free from debris
  • Hole covers are kept intact
  • Rainwater is kept out of blastholes

The Hole Covers are available for blasthole diameters ranging between 3 inch (76mm) to 12.25 inch (311mm).

How do the Hole Covers add value?

The Hole Covers are used throughout blast block preparation. Once blastholes are drilled, the cones are inserted into the holes to maintain hole collar integrity and to keep debris out.

Before priming and charging, the Hole Cover is removed temporarily, and re-inserted once priming and charging has been completed.

The cone is then left in the hole, preventing any debris or collar collapses before stemming takes place. When the blast team is ready to stem, the cones are removed and stored for future use.

A worker marking holes in the ground with cones for construction activities, such as drilling, blasting, or survey points.

BSC 01

65mm (top) x 125mm (bottom) x 190mm (height)

BSC 02

63mm (top) x 135mm (bottom) x 270mm (height)

BSC 03

118mm (top) x 215mm (bottom) x 260mm (height)

BSC 04

125mm (top) x 193mm (bottom) x 335mm (height)

BSC 05

90mm (top) x 295mm (bottom) x 445mm (height)

BSC 06

90mm (top) x 295mm (bottom) x 445mm (height)

BSC 07

160mm (top) x 300mm (bottom) x 460mm (height)

BSC 08

90mm (top) x 350mm (bottom) x2 00mm (height)

BSC 09

90mm (top) x 500mm (bottom) x 260mm (height)

BSC 10

115mm (top) x 311mm (bottom) x 1000mm (height)

We use cookies on our website to see how you interact with it. By accepting, you agree to our privacy policy and the use of such cookies.